JOWATHERM 286.61 alb - adeziv fuzibil EVA
Vă rugăm să vă autentificați sau să vă înregistrați pentru a vedea prețurile produselor.
| Ambalare | Cantitate in cutie | ||||
|---|---|---|---|---|---|
|
1 cartridge,⌀63 mm | ||||
|
15,4 kg (48 pcs) ⌀63 mm | ||||
| 48 | |||||
Descărcări
Parametrii
| Denumirea producătorului | C000083 - 82028661XXX0000 , C000084 - 82028661XXX0015 |
|---|
Descriere produs
White filled hot melt adhesive Jowatherm 286.61 based on EVA in cartridges is intended for gluing furniture edges using Holz-Her cartridge equipment. It is suitable for gluing edges using edge-banding machined with slow to medium feed rate. Available also in beige (natural) colour (Jowatherm 286.60).
USAGE / EXAMPLE OF USE
- gluing ABS, PVC and PP edges with primer
- gluing laminate edges
- gluing veneer edges
TECHNICAL DATA & SUITABLE WORKING CONDITIONS
Parameter | Value |
Appearance | Cartridge, ø63 mm, lenght 80 mm |
Colour | White |
Viscosity (Brookfield 200°C) | 62 500 – 12 500 mPas |
Softening temperature (Kofler) | 95 ± 5 °C |
Density at 20°C | 1,30 ± 0,05 g/cm3 |
Open time at 190 °C | 8 ± 3sec. |
Temperature in tank | 190 – 210 °C |
Temperature on roller | 190 – 210 °C |
Humidity of material to be bonded | 8 – 10 % |
Min. room temperature (°C) | 18 °C |
Ideal operation speed | 10 – 30 m/min |
Pressure on pressure roller | 3 – 5 kg/cm2 |
APPLICATION / HANDLING
When using the hot melt adhesive, observe the application temperature and check it on a regular basis by measuring on the roller or nozzle. The temperature shown on the edge-banding machine control panel may differ from the actual temperature. Lower temperature of the adhesive may affect its open time and consequently impair the bonded joint quality. At a higher temperature, the adhesive may degrade, which affects its colour, viscosity and adhesion. In case of break of work, it is suggested to reduce by 30 – 40 °C the temperature in tray to avoid a degradation of the performance of the product. When banding edges from various materials, regular testing of banding strength and quality is advisable. Recommended temperature of the environment and materials is 15 – 25 °C (when gluing cold or damp surfaces, gluing defects may occur due to the reduction in open time).
CLEANING
The working elements should be cleaned using spatula for example. Clean any residual adhesive on furniture elements using Hraniclean 01 (08).
PRECAUTIONS FOR SAFE USING
Even under normal conditions of use product may produce hazardous vapours which may cause a respiratory tract irritation. Provide adequate ventilation. Before use read the SDS of the product.
STORAGE
Keep in original container. If stored in closed containers in a cold and dry place at temperatures not exceeding 20°C, the shelf life is 24 months.
TRANSPORT
Information concerning safety and handling through the transport please refer to the Safety Data Sheet.